Kodak A-61097 manual Custom Check Digit Configuration Help

13.Select the Lookup Table parameter for definition.

14.Enter the desired lookup table values.

Custom Check Digit Definition

Custom Check Digit Formula

Check Digit = Constant 2 - [Sum of IA Digits * Attributes] + Constant 1

Divisor

Parameter	Current Value
Attributes
	46231546231
Constant 1	00
Constant 2	00
Divisor	07
Left/Right	Right
LUT Status	No
Lookup Table	abcdefghijk
Help
Previous Menu

Enter lookup table. Req’d entry 11 digits.

abcdefghijk

To Change: Enter Value

To Retain: Press Enter

Custom Check Digit Configuration Help

Parameters	Explanation
Attributes	These are position weights for digit in the IA. A zero-
	value attribute causes the associated IA digit to be
	excluded from the check digit calculation. Each digit in
	the IA is multiplied by its attribute and summed.
Constant 1	A constant in the range 00–99.
Constant 2	A constant in the range 00–99.
Divisor	A constant in the range 00–99. Not used if value is
	zero.
Left/Right	Indicates the location of the check digit in relation to
	the decimal point in the calculation results. If left is
	specified, the check digit is immediately to the left of
	the decimal point and vice versa.
LUT Status	If Yes, the final check digit calculated is used as an
	index into a lookup table. If No, the lookup table is
	ignored.
Lookup Table	A table of check digit values.

A-61097 May 1997 2-37