Kohler 24VDC, 6VSG, 36VDC, 48VDC manual 3.12Generator Set Information Menu, Genset Run Time Menu

3.12Generator Set Information Menu

The generator set model number and serial numbers are displayed (see Figure 3-13). No changes are allowed from this menu.

Model and serial numbers are factory-set and should not require changes in the field, except in the event that the controller is being replaced. A personal computer running Kohler® SiteTech™ software is required to enter the generator set model number and serial numbers on a replacement controller. Contact an authorized Kohler distributor/dealer for service.

Genset ---->	Genset M/N:
Information	6VSG-48V

3.13 Genset Run Time Menu

The data shown in Figure 3-14are displayed. No changes are allowed from this menu.

The Next Maintenance menu shows the number of hours of generator set operation until maintenance is required. The estimated date for the next scheduled maintenance is also displayed. The maintenance reminder intervals are based on the engine manufacturer’s recommendation for changing the oil. See Section 4, Scheduled Maintenance, for maintenance instructions.

After changing the oil and performing other recommended maintenance, go to the Overview menu to reset the maintenance timer. See Section 4.2.5 for instructions to reset the maintenance timer.

Genset S/N:

########

Controller S/N:

########

<---- Return

tp6804

Figure 3-13Generator Set Information Menu

Genset ---->

Run Time

Eng Runtime: 100.6 h

Eng Starts:

127

Next Maintenance: 150 h or Mar2012

<---- Return

tp68

Figure 3-14Generator Set Run Time Menu

TP-6843 1/13 Section 3 VSC Controller Operation 33