Kohler 36VDC, 6VSG, 24VDC, 48VDC manual Networking Status Submenu, Dhcp

3.16.1 Networking Status Submenu

The Networking Status submenu contains settings for OnCue®. See Figure 3-22.See the OnCue® Software Operation Manual for information about the appropriate network settings for OnCue®. Changes to these settings are not typically required.

If DHCP is enabled, IP parameters are not displayed. If DHCP is disabled (i.e., if a static IP address is used), the IP parameters are displayed.

To enable or disable DHCP and change the IP settings, go to the Networking Configuration menu. See Section 3.16.2.

Networking---->

Information

Networking---->

Status

OnCue Status: Connected

DHCP:

Enabled

IP Address: 123.456.789.123

Subnet Mask: 123.456.789.123

Gateway:

123.456.789.123

DNS 1: 123.456.789.123

DNS 2:

123.456.789.123

Ethernet Status: Disconnected

OnCue Server: 123.456.789.123

<---- Return

tp68

Figure 3-22Network Status Submenu

38 Section 3 VSC Controller Operation TP-6843 1/13