Introduction
This manual provides operation and maintenance instructions for the DC (direct current) variable speed model 6VSG generator sets equipped with Kohler VSC generator set controllers.
This generator set is approved for use in stationary applications in locations served by a public utility, photovoltaic cells, wind turbines or any combination of power sources tied to a battery bank. Have the generator set installed by an authorized distributor/dealer or service technician. Refer to Installation Manual, for installation instructions.
Information in this publication represents data available at the time of print. Kohler Co. reserves the right to change this publication and the products represented without notice and without any obligation or liability whatsoever.
Read this manual and carefully follow all procedures and safety precautions to ensure proper equipment operation and to avoid bodily injury. Read and follow the Safety Precautions and Instructions section at the beginning of this manual. Keep this manual with the equipment for future reference.
The equipment service requirements are very important to safe and efficient operation. Inspect the parts often and perform required service at the prescribed intervals. Obtain service from an authorized service distributor/dealer to keep equipment in top condition.
List of Related Literature
Figure 2 identifies related literature available for the generator sets covered in this manual. Only trained and qualified personnel should install or service the generator set.
Literature Type | Part Number |
|
|
Installation Manual, Model 6VSG |
|
Generator Set | |
|
|
Service Manual, 6VSG Generator Set | |
|
|
Operation Manual, OnCue® Software | |
Operation Manual, SiteTech™ Software | |
Installation Instructions, Programmable |
|
Interface Module (PIM) | |
|
|
Parts Catalog, Model 6VSG | |
|
|
Figure 2 Related Literature
Figure 1 6VSG Generator Set
Introduction 9 |
