Konica Minolta C10P manual 120, DEFAULT/ENERGY Saver MGT

Symptom	Cause	Solution
Printing	The printer is set to a	It takes more time to print with special
takes too	slow printing mode	media. When using regular paper,
much time.	(for example, thick	make sure that the media type is set
	stock or transpar-	properly in the driver.
	ency).
	The printer is set to	It takes time for printing to start in
	power saving mode.	power saving mode. If you do not want
		to use this mode, disable it. (SYSTEM
		DEFAULT/ENERGY SAVER MGT
		menu)
	The job is very com-	Wait. No action needed.
	plex.
	The printer memory is	Add more memory.
	insufficient.
	A toner cartridge for a	Install a correct KONICA MINOLTA
	different region is	toner cartridge approved for your spe-
	installed (X INCOR-	cific printer.
	RECT is displayed in
	the message win-
	dow).
Blank pages	One or more of the	Check the toner cartridges. The image
are printed.	toner cartridges are	will not print correctly or not at all, if a
	defective or empty.	cartridge is empty.
	The wrong media is	Check that the media type set in the
	being used.	driver matches the media loaded in the
		printer.
Printer	The printer was in the	When in the configuration menu struc-
returned to	configuration menu	ture, select your choice within 2 min-
IDLE before	structure without a	utes.
the configu-	selection being made
ration menu	within two minutes.
was
changed.

120 Solving Other Problems