Konica Minolta C10P Chaining, MAP Mode, On/Off, Logi, Cal, Tray Duplex, Orien, Tation, Ery

	TRAY	Settings	YES/NO
	CHAINING
		If YES is selected and the specified paper tray runs
		out of paper during printing, a paper tray loaded with
		paper of the same size is automatically selected so
		printing can continue.
		If NO is selected and the specified paper tray runs
		out of paper, printing stops.
	MAP	MODE	Settings	ON/OFF
			Select whether or not the Tray Mapping
			function is used.
		LOGI-	Settings	PHYSICAL TRAY 1/
		CAL		PHYSICAL TRAY 2
		TRAY
			Specify whether jobs received from
		0-9	another manufacturer's printer driver are
			printed using Tray 1 or Tray 2.
			PHYSICAL TRAY 2 is the default only
			for LOGICAL TRAY 2. The default for
			all other logical trays is PHYSICAL
			TRAY 1.
DUPLEX	Settings	OFF/SHORTEDGE/LONGEDGE
	If OFF is selected, duplex printing is not possible.
	If LONGEDGE is selected, the pages will be printed on both sides
	of the paper for long-edge binding.
	If SHORTEDGE is selected, the pages will be printed on both
	sides of the paper for short-edge binding.
ORIEN-	Settings	PORTRAIT/LANDSCAPE
TATION
	Specify the orientation of the media.
PAGE	Settings	ON/OFF
RECOV-
	Select whether or not the page is printed again after recovering
ERY	from a paper misfeed.
	If ON is selected, the page that was misfed is printed again.
	If OFF is selected, printing continues with the next page without
	printing the misfed page.

34 Configuration Menu Overview