Konica Minolta C10P Selecting Driver Options/Defaults for Windows, Windows XP/Server 2003/2000/NT

Selecting Driver Options/Defaults (for Windows)

Before you start working with your printer, you are advised to verify/change the default driver settings. Also, in case you have options installed, you should “declare” the options in the driver.

Windows XP/Server 2003/2000/NT 4.0

1 Choose the driver’s properties as follows:

–(Windows XP/Server 2003)

From the Start menu, choose Printers and Faxes to display the Printers and Faxes directory. Right-click the KONICA MINOLTA bizhub C10P PCL6 or KONICA MINOLTA bizhub C10P PS printer icon and choose Properties.

–(Windows 2000/NT 4.0)

From the Start menu, choose Settings and then Printers to display the Printers directory. Right-click the KONICA MINOLTA bizhub C10P PCL6 or KONICA MINOLTA bizhub C10P PS printer icon and choose Properties.

" PostScript printer driver for Windows NT 4.0 is not supported.

2 If you have installed options, proceed with the next step. Otherwise, skip to step 9.

3 Select the Configure tab.

4 Check that the installed options are correctly listed. If not, proceed with the next step. Otherwise, continue with step 8.

5 Click the Refresh to automatically configure installed options.

" The Refresh is available only if bi-directional communication is available with the printer; otherwise it is grayed out.

6 From the Device Options list, select an option, one at a time, and then select Enable or Disable from the Settings menu.

" If Printer Memory is selected, select 128 MB, 256 MB, 384 MB or 640 MB, according to the installed memory. The factory default setting is 128 MB.

7 Click Apply.

" Depending on the version of the operating system, Apply may not appear. If this is the case, continue with the next step.

10 Selecting Driver Options/Defaults (for Windows)