Konica Minolta C10P Net, Zone, ZONE2, Ethernet, AUTO/100 Full Duplex, BINARY/QUOTED Binary, Job

		NET	Settings	
		ZONE
			Specify the Macintosh EtherTalk zone.
			The zone name can contain a maximum
			of 16 characters.
		NET	Settings	-
		ZONE2
			Specify the Macintosh EtherTalk zone.
			The zone name can contain a maximum
			of 16 characters.
	ETHERNET	Settings	AUTO/100 FULL DUPLEX/
	SPEED		100 HALF DUPLEX/
			10 FULL DUPLEX/
			10 HALF DUPLEX
		Specify the transmission speed for the network and
		the transmission method for bi-directional
		transmission.
	PS	Settings	BINARY/QUOTED BINARY
	PROTOCOL
		Select whether PostScript jobs are received in the
		binary format or the quoted format.
USB	ENABLE	Settings	YES/NO
		If YES is selected, USB is enabled.
		If NO is selected, USB is disabled.
	JOB	Settings	0-60-999
	TIMEOUT
		Specify the length of time (in seconds) until the print
		job being received is timed out when USB is being
		used.
PARAL-	JOB	Settings	0-30-999
LEL	TIMEOUT
		Specify the length of time (in seconds) until the print
		job being received is timed out when Parallel is
		being used.
ACTIVE	Settings	ETHERNET/PARALLEL
I/F
	Specify the interface to be used.
	An Ethernet and parallel connection cannot be used at the same
	time.

Configuration Menu Overview 41