Konica Minolta C10P Envelopes, Do not use thick stock that is, Do not use envelopes that have

DO NOT use thick stock that is

„Mixed with any other media in the trays (as this will cause printer misfeed- ing)

Envelopes

Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the front, back, and flap. Anything printed in these lay- ered regions may be lost or faded.

Capacity	Tray 1	Up to 10 envelopes, depending on their
		thickness
	Tray 2	Not supported
Orientation	Face up
Driver	Envelope
Media Type
Weight	60 to 163 g/m² (16 to 43 lb bond)
Duplexing	Not supported

Use envelopes that are

„Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps

" Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem.

„Approved for laser printing

„Dry

DO NOT use envelopes that have

„Sticky flaps

„Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal- ing

„Transparent windows

„Too rough of a surface

„Material that will melt, vaporize, offset, discolor, or emit dangerous fumes

„Been presealed

Media Types 53