Konica Minolta C10P manual Dual In-Line Memory Module Dimm, Required Memory during Printing

Dual In-Line Memory Module (DIMM)

A dual in-line memory module (or DIMM) is a compact circuit board with sur- face-mount memory chips.

Your printer comes with 128 MB SDRAM printer memory on board. However, you can upgrade to a maximum of 640 MB of RAM through the installation of an additional unbuffered SDRAM DIMM. Your printer comes with one free DIMM slot.

Required Memory during Printing

	Monochrome		Full Color		Full Color
	Simplex / Duplex		Simplex		Duplex
Resolution	Stan-	High	Stan-	High	Stan-	High
	dard	Quality	dard	Quality	dard	Quality
Paper Size
Letter/A4	128 MB	128 MB	128 MB	128 MB	128 MB	256 MB
Legal	128 MB	128 MB	128 MB	256 MB	128 MB	384 MB

Installing a DIMM

Note

It’s very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on Page 136. In addition, always handle circuit boards by the edges only.

1 Turn off the printer and discon- nect the power cord and inter- face cables.

" If the duplex option is installed, remove it.

Dual In-Line Memory Module (DIMM) 137