Replacing the Backup Battery

If the backup battery is dead, the printer’s date and time cannot be retained. Follow the procedure described below to replace the backup battery.

Note

It’s very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on Page 136. In addition, always handle circuit boards by the edges only.

1 Turn off the printer and discon- nect the power cord and inter- face cables.

" If the duplex option is installed, remove it.

2 Using a screwdriver, remove the screw on the back of the printer.

86

Replacing Consumables

Page 98
Image 98
Konica Minolta C10P manual Replacing the Backup Battery