Konica Minolta C10P manual Black, Toner, Cyan, Magenta, Yellow, Low, Action, Stop/Continue, Out

" All factory default values are shown in bold.

REPLACE	BLACK	Settings	YES/NO
TONER
		When YES is selected, the carousel rotates to the
		black toner cartridge, so that it can be replaced.
		For details on replacing the toner cartridge, refer to
		“Replacing a Toner Cartridge” on page 78.
	CYAN	Settings	YES/NO
		When YES is selected, the carousel rotates to the
		cyan toner cartridge, so that it can be replaced.
		For details on replacing the toner cartridge, refer to
		“Replacing a Toner Cartridge” on page 78.
	MAGENTA	Settings	YES/NO
		When YES is selected, the carousel rotates to the
		magenta toner cartridge, so that it can be replaced.
		For details on replacing the toner cartridge, refer to
		“Replacing a Toner Cartridge” on page 78.
	YELLOW	Settings	YES/NO
		When YES is selected, the carousel rotates to the
		yellow toner cartridge, so that it can be replaced.
		For details on replacing the toner cartridge, refer to
		“Replacing a Toner Cartridge” on page 78.
TONER	Settings	YES / NO
LOW
	When set to YES, Toner low indication will show up on the control
ACTION
	panel when one or more toner cartridges reach to the low
	condition.
TONER	Settings	STOP/CONTINUE
OUT
	When set to CONTINUE, printing continues even if the toner
ACTION
	cartridge is empty.
	When set to STOP, printing stops when the toner cartridge is
	empty.

36 Configuration Menu Overview