Konica Minolta C10P manual ETHER- Tcpip NET Enable, Dhcp, Bootp, Router

USB

ENABLE

JOB TIMEOUT

PARALLEL

ACTIVE I/F

JOB TIMEOUT

" All factory default values are shown in bold.

ETHER- TCPIP NET

ENABLE	Settings	YES/NO
	If YES is selected, TCP/IP is enabled.
	If NO is selected, TCP/IP is disabled.
DHCP/	Settings	YES/NO
BOOTP
	Select whether or not the IP address is
	automatically acquired.
	If YES is selected, the IP address is auto-
	matically acquired.
	If NO is selected, the IP address is not
	automatically acquired.
IP	Setting	192.168.1.2
ADDRESS
	Set the IP address for this printer on the
	network.
	Use the Up, Down, Left, and Right keys
	to specify the value.
	If the IP address is manually specified,
	DHCP/BOOTP is automatically set to NO.
DEFAULT	Setting	192.168.1.2
ROUTER
	Specify the IP address of the router if one
	is on the network. Use the Up, Down,
	Left, and Right keys to specify the value.

Configuration Menu Overview 39