Connecting the AC adapter

1.

Connect the output plug of the AC

 

 

adapter to the scanner’s DC terminal.

2

 

 

2.

Plug the AC adapter into a standard

1

 

household outlet.

Turning on the scanner

Confirm the front door of the scanner is closed; the scanner is unable to initialize if the door is open. Turn on the scanner with the power switch. Start up the computer.

When launching the DiMAGE Scan Utility, the indicator lamp (1) blinks when the scanner is initializing. Once the indicator lamp glows steadily, the scanner can be used.

1

Power switch

Disconnecting the scanner

Never disconnect the scanner when the indicator lamp is blinking.

Quit the DiMAGE Scan Utility. Confirm that the scanner indicator lamp is not blinking. Turn the scanner off and then disconnect the cable.

17

Page 17
Image 17
Konica Minolta IV instruction manual Connecting the AC adapter, Turning on the scanner, Disconnecting the scanner