
Checking software installation - Windows
If the scanner was connected to the computer before the DiMAGE Scan Utility was installed, the computer may not recognize the scanner unit. Use the following instructions to confirm the driver was installed correctly:
1.Windows 98, 2000, Me: right click on the
Windows XP: from the start menu go to the control panel. Click on the performance and maintenance category. Click the system button to open the system properties window.
2.Windows 2000 and XP: select the hardware tab in the properties window and click the
Windows 98 and Me: click the
3.The driver file should be located in the
If the file are not located in the
1.Click on the driver to select it for deletion.
2.Windows 2000 and XP: click on the action button to display the
Windows 98 and Me: click the remove button. A confirmation screen will appear. Clicking the yes button will remove the driver from the system.
3.Restart the computer. Confirm the driver is in the proper location using the instructions at the top of the page.
When the scanner is initially connected to a computer with a Windows 98, 98SE, or 2000 Professional operating system, the
When the scanner is initially connected to a computer with a Windows XP operating system, the
95