Saving exposure settings | Konica Minolta IV specification

Adjust the sliders or enter values between ±2 in 0.1 increments in the text boxes. Press the apply button (1) to view the effect on the preview image and the histograms. Repeat until the desired result is achieved. To cancel all settings, click the reset button and press

the apply button to initialize the preview image.	1
the apply button to initialize the preview image.
When using autoexposure, adjustments are made in
reference to the exposure determined by the AE system.
To calibrate the scanner in reference to a standard
exposure, turn the autoexposure functions off in the
preference window (p. 44); set exposure control for
negatives to manual or uncheck the auto-expose-for-
slides check box. This is recommended when making
settings for specific films.

Click the apply-all button to use the exposure-control
settings for all the images in the film holder. To cancel
changes to exposure once the apply-all function has
been used, click the reset button and then click the
apply-all button again.

Saving exposure settings

Click the save setting button to open the save window.

Enter the name for the setting file. Click OK.

Loading exposure settings

Click the load setting button to open the load window.

Click on the file name to highlight it. Click OK to apply the settings to the image displayed in the exposure-control tab. Confirm the autoexposure settings in the preferences window (p. 44).

To delete a setting file, open the load window and click on the file name to highlight it. Use the keyboard delete key to erase the file.

47

Image 47

Konica Minolta IV instruction manual Saving exposure settings, Loading exposure settings

Contents

Page Selective-color palette Tone-curve corrections Before YOU Begin For Proper and Safe USE DiMAGE Scan Dual Table of Contents Page Table of Contents Names of Parts InstallationBefore installing the DiMAGE Scan Utility DiMAGE Scan system requirements Adobe Photoshop Elements Additional memory requirements Windows Page Macintosh Page Connecting the USB cable Scanner SetupBefore connecting the scanner to a computer Turning on the scanner Connecting the AC adapterDisconnecting the scanner Loading 35mm film strips Where is the emulsion?Loading the Film Holders Handling film Loading a film holder into the scanner Loading mounted slides Using the APS Adapter AD-10 sold separately APS Ejecting a film holder Dimage Scan Launcher Launching the Easy Scan Utility Easy Scan Utility Scanner Notes Macintosh Using the Easy Scan Utility On next Easy Scan Utility Page Scanning basics Basic ScanningLaunching the DiMAGE Scan Utility Main window and index scan tab Scanner setup Selecting index thumbnails Making an index scan Fit-to-window button Flip and rotate images Making a prescan Main window and prescan tab CHP button APS film Grab toolMagnifying tool Auto cropping Making the final scan Tiff BMP Pict Main window and image-correction tab Basic Image Processing Pixel Polish Auto Dust Brush retouching level Auto Dust Brush Variation palette Brightness, contrast, and color balance palette Green An introduction to color Undoing and redoing image corrections Comparing pre and post-correction images Quitting the DiMAGE Scan Utility Advanced Scanning Setting scanner preferencesPage Exposure-control tab Loading exposure settings Saving exposure settings Reverse frame order More index scan functions Loading an index file Saving the index thumbnailsSaving an index file Point AF Autofocus More prescan functions Manual focus Manual cropping AE area selection Autoexposure Inputting scan settings manually About resolution and output size Scan setting examples Deleting a Job Saving scan settings as a Job More image-processing tools Advanced Image Processing Prescan display Sample display area Digital Grain Dissolver Tone curve and histogram palette Using tone curves Drawing tone curves by freehand About the tone curve Short guide to tone curve corrections Increasing image contrast Histogram corrections Tone curve / histogram auto setting Konica Minolta History Short guide to histogram correctionsPage White, gray, and black point corrections Tracking image corrections Snapshot button Setting the white and black-point values Hue, saturation, and lightness palette About RGB and CMY With mask Original image Unsharp mask Loading image-correction Jobs Saving image corrections Custom Wizard Page Batch Scan Utility Page Advanced Batch Scan setup Page Color Matching Setting the output color space Ntsc CIE RGB Output color spaces Scanner color profiles Setting the monitor ICC profile Output Color Space Monitor RGB Color matching recommendations Auto Dust Brush PLUG-IN Before installing the plug-inInstallation Windows Page Installation Macintosh Using the Auto Dust Brush plug-in Auto Dust Brush PLUG-IN Glossary of common terms Appendix Uninstalling the DiMAGE Scan Software Windows Installed files and folders Job file list 35mm Troubleshooting Checking software installation Windows Technical Specifications Record keeping Warranty and product registrationTechnical support Image processing Image Data Sheet Hue corrections