Konica Minolta IV instruction manual Windows

Windows

In the example below, the hard disk is drive C, and the CD-ROM drive is drive D. The letters designating the drives will vary between computers.

Turn on the computer to start up the Windows operating system. Windows XP and 2000 users should logon as an administrator.

Insert the DiMAGE Scan Utility CD-ROM into the CD-ROM drive. The DiMAGE Scan Dual IV setup screen will open.

Click the “Starting up the DiMAGE Scan Dual4 installer” button. The program decompression screen will briefly appear. The Install Shield Wizard will start automatically.

If the Install Shield Wizard does not start up automatically, execute the following procedure:

1.Initiate the run routine on the start menu.

2.Click the browse button in the run dialog box.

3.Select the CD-ROM drive from the look-in box in the browse window.

4.Open the driver folder.

5.Open the English folder.

6.Click on the Setup.exe file. It will be dis- played with its location in the run dialog box:

D:\Driver\English\Setup.exe. Click OK.

The opening screen of the InstallShield Wizard will appear. Click the next button to continue.

Click the yes button to accept the agreement and continue. Read the entire agreement carefully before continuing. If you do not agree to the terms of the license agreement, click the no button to exit the setup program.

12 INSTALLATION