Korg KTV1 owner manual Basic operation Playback, Turning the power on/off, Power, Monitors

Basic operation — Playback

1. Turning the power on/off

Power

To turn the power on

1Connect the AC adapter, your input devices, and your output devices.

2Press the power switch to turn the power on.

After a few moments, the VALUE display will indicate the currently selected style and bank.

NOTE You can specify the bank and style number that will be selected when the power is turned on. (☞ p.28)

To turn the power off

To turn the power off, press the NO/ESC key several times until the BUSY indicator goes dark; then press the power switch to turn it off.

NOTE Never turn off the power while the BUSY indicator is lit. Doing so may damage the kaptivator’s internal hard disk. So don’t do it.

Monitors

The two color LCD monitors display different content.

MONITOR 1 displays the MAIN OUT video signal, the video source connected to VIDEO INPUT 1 or the video source connected VIDEO INPUT 2.

MONITOR 2 displays the bank list (a still image from each clip), all the video material as- sociated with a style (inputs, output, transition, etc.) or the DV input.

Changing the content of the monitors

Pressing the MONITOR SELECT key will change the information being displayed in the monitor associated with that key.

The content of the monitors can also be set to change automatically when you select a style. (☞ p.30: Style Parameter List, Monitor select setting)

Adjusting the monitors

The monitors can be adjusted individually to provide easy visibility and to compensate for factors such as viewing angle, location, surroundings, ambient lighting, etc.

1Hold down the EDIT key and press the MONITOR 1 or 2 SELECT key.

2Pressing the EDIT key will cycle through the following parameters.

Brightness: “br” will blink in the VALUE display, followed by the current value (00–99)

Contrast: “cn” will blink in the VALUE display, followed by the current value (00–99)

Color Balance: “cL” will blink in the VALUE display, followed by the current value (00–99)

3As you watch the monitor, turn the VALUE knob to set each parameter.

4Press the YES/WRITE key twice to save your settings.

If you decide not to save your settings, press the NO/ESC key twice.

12