Korg KTV1 owner manual Erasing a motion sequence

Erasing a motion sequence

1If the MOTION key is blinking, you are already in Motion Sequence mode. To enter Motion Sequence mode, press the MOTION key; the MOTION key will blink. Press the blinking MOTION key to exit Motion Sequence mode.

2Use the VALUE knob to select the motion sequence number “-**-” (shown in the VALUE dis- play) that you want to erase, and then press the YES/WRITE key.

3Hold down the EDIT key, the NO/ESC key, and the MOTION key (all simultaneously). Of the motion sequence number (-**-), only the numerical portion will blink.

4Press the YES/WRITE key twice to erase the recorded motion sequence. If you decide not to erase the motion sequence, press the NO/ESC key twice.

18