Routing 33
This mixes clips from Group A and Group B, applies an effect, and then mixes this with an external input. The MAIN OUT is not displayed in MONITOR 2 when using this routing.
A |
B |
1
2
3
4
MAIN OUT
1
2
3
4
Routing 34
This applies an effect to the external input, and mixes this with the combination of clips A and B. The MAIN OUT is not displayed in MONITOR 2 when using this routing.
A |
B |
1
2
3
4
MAIN OUT
1
2
3
4
Routing 35
This mixes clips A and B, mixes this with the external input, and then applies an effect.
A |
B |
1
2
4
3
MAIN OUT
1
2
3
4
4. Separate output Routings
Use these routings when you’ve connected MONITOR OUT 2 as an independent output connector to a device such as the KPE1. These routings give you two separate outputs; MAIN OUT and MONITOR OUT 2.
Routing 41
MONITOR OUT 2 will simply output the clip from Group B. The clip from Group A will be processed by the effect, mixed with the external input, and sent from MAIN OUT.
36
