Korg KTV1 owner manual Editing examples, Changing the operation of the ribbon controller

Editing examples

Changing the operation of the ribbon controller

1Select the style that you want to edit.

For this example, choose style number “04”.

2Hold down the EDIT key and press the STYLE key. The display will indicate “A1.**” and the EDIT key will blink.

3Press the EDIT key several times to choose parameter B5.

Here you can choose the controller that will modify the effect. To choose the ribbon control- ler, choose a setting in the range of “G1”–“G4.” With the “G1” setting, the effect will inten- sify as you move the controller from bottom to top. Conversely with the “G2” setting, the effect will intensify as you move from top to bottom. With the “G3” setting, the effect is at maximum at either end, and minimum in the center. The “G4” setting produces the oppo- site result, with the maximum effect in the center position.

4When you’re finished editing, press the YES/WRITE key. Use the VALUE knob to select the destination style location (style number) where you want to save the edited style. Then press the YES/WRITE key to finish saving. If you decide not to save the changes you made, press the NO/ESC key.

Changing the wipe type

1Select the style that you want to edit.

For this example, choose style number “11”.

2Hold down the EDIT key and press the STYLE key. The display will indicate “A1.**” and the EDIT key will blink.

3Press the EDIT key several times to choose parameter A2.

This parameter specifies the type of transition. Choosing “00” will specify a fade. In this ex- ample, let’s select “03” to produce a wipe that changes the position of the images.

4Press the EDIT key to select parameter A3.

This selects the controller that will perform the wipe operation. Choose “F1” if you want to specify the fader. Choose “F2” if you want to invert the direction of the fader operation.

5Press the EDIT key to select parameter A4.

This parameter specifies the type of wipe and the variable range of the controller. If you want to create a wipe that pushes the image from left to right, specify a value in the range of “30”– “39.” The second digit of the value specifies the range of fader movement. In this case, se- lecting “30” will produce a wipe using the entire range of the fader. Selecting “35” will wipe using half the range of the fader. Selecting “39” will cause the image to switch at the mid- point of the fader.

6When you’re finished editing, press the YES/WRITE key. Use the VALUE knob to select the destination style location (style number) where you want to save the edited style. Then press the YES/WRITE key to finish saving. If you decide not to save the changes you made, press the NO/ESC key.

20