Trobleshooting | Korg KTV1 guide

Trobleshooting

Power does not turn on.

❐Is the AC adapter connected?

❐Is the AC adapter connected to an AC outlet?

The image from the connected device is not input.

❐Is the cable correctly connected to the connector?

❐Is your external device powered-on, and is it set correctly?

❐Have you chosen the correct input setting for the kaptivator?

Image does not appear in the monitor.

❐Is the external device powered-on, and it is set correctly?

❐Have you chosen the correct input setting for the kaptivator?

❐Is MONITOR SELECT set correctly?

❐If there is a problem with the display, try adjusting the monitor. (☞p.12)

Clip does not play back.

❐Is the style setting correct?

❐Could you have selected a style in which playback is synchronized to an audio trigger, or in which the ribbon controller adjusts the playback speed?

Can’t delete or edit a clip.

❐Could the clip protect setting be “On”? (☞p.24)

❐Is a motion sequence running? (☞p.17)

Can’t control via MIDI.

❐Is the MIDI cable connected correctly?

❐Have you made settings so that the Kaptivator is transmitting and receiving MIDI data on the same MIDI channel as the external device?

❐Is the MIDI channel set correctly? (☞p.27)

Owner’s Manual

47

Image 49

Korg KTV1 owner manual Trobleshooting

Contents

Page Precautions Handling of the internal hard disk About your dataAbout the video clip collection Table of Contents Introduction Main features Top panel Controls and connectors Value knob YES/WRITE key Front panel Video Input indicator Audio Trig Input L/R jacks Rear panel Selecting the DV connector input/output setting Connection diagramAbout video signal formats Basic connections Concepts Basic concepts and operationSampling video Styles Terms Power Turning the power on/offBasic operation Playback Monitors Playing a clip Selecting and playing videoSelecting a bank Selecting a style Viewing an external video source Working with external video sourcesMixing an external video source with a clip To select an external video source Synchronized playback using the BPM setting Setting the BPMSynchronizing to music Adjusting the audio trigger level Synchronized playback using an audio triggerUsing an external audio signal to control an effect Synchronizing the start of the clip to the audio trigger Playing a motion sequence Using Motion SequencesLooping the playback of a motion sequence Recording a motion sequence Erasing a motion sequence Editing a style Customizing a Style -Style EditingChoosing a style Style editing Changing the operation of the ribbon controller Editing examplesChanging the wipe type Sampling Creating a clip -Sampling and Quick EditingSampling video Sampling a video input source Main Out Capture Capturing video and using it as an input sourceResampling to a clip Copying a clip ClipsErasing a clip Editing a clip Turning Protect On or Off Copying a bank BanksAssigning a bank to a clip pad group Copying an entire bank of clips Operations in Utility mode Utility modeEntering Utility mode Navigating the Utility mode Midi setting Utility menu items and proceduresSetting the control change number HDD free Backup Power on setupBacking up video data to an external device Restoring video data Backing up style and motion sequence data Preset InitializeRestoring style or motion sequence data Style Parameter List Parameter list Group B Operation settings Controller Assignment list Start Variation list Single Routings Routing listDual Routings Three-layer Routings Separate output Routings Main OUT Monitor OUT Parameter A2 A5 = 00 Fade Transition listParameter A2 A5 = 01 Wipe Parameter A2 A5 = 02 Wipe Effect list Enabled 1 and Enabled Playback Type and Playback Pattern selection Clip parameter listType 1 Specified End Point Pattern 1 Normal Loop Pattern 3 One-Shot Type 2 Tempo and Beat Specified End PointPattern 4 Reverse Normal Loop Pattern 5 Reverse Alternating Loop Pattern 1 Normal Type 3 Specified Loop Point and End PointPattern 3 Reverse Normal Loop Pattern 4 Reverse Alternating Loop Type 4 Tempo and Beat Specified Loop Point and End Point Using the kaptivator with your computer Using BPM to control the video playback speedAppendix Tips for working with the kaptivator Sampling video from your computer into the kaptivator Managing data on the hard drive Using Midi to work with clips Trobleshooting Specifications Preset Style list Style Cheat Preset Video Effect settings Controller will apply a video Style User KTV1 Midi Implementation Data Processload Completed CONT# Midi Implementation Chart Important Notice to Consumers