Preset Initialize | Korg KTV1 specification

Backing up style and motion sequence data

You can backup global data, style data, a single motion sequence, or a block of ten motion sequences to a MIDI filer, sequencer or other MIDI storage device.

1Enter Utility mode.

2Press the EDIT key to select “Backup,” and press the YES/WRITE key.

3Press the EDIT key to select “MIDI exclusive,” and press the YES/WRITE key. Transmit a dump request message from your external device.

If you’re backing up motion sequence data, you’ll also need to specify the number or block. When the kaptivator receives the dump request, it will transmit the backup data.

Restoring style or motion sequence data

You can restore the global data, style data, a single motion sequence, or block of ten motion sequences that you saved as a backup file.

1Enter Utility mode.

2Press the EDIT key to select “Backup,” and press the YES/WRITE key.

3Press the EDIT key to select “MIDI exclusive,” and press the YES/WRITE key. Transmit the backup data from your external device.

NOTE Since the restore operation will sequentially overwrite the data within the kaptivator, halting the restore operation before it has completed will mean that the motion sequence number that was being written at that moment will contain no data (i.e., erased).

Preset Initialize:

At any time, you can always restore the kaptivator to its original factory settings - includ- ing style, clip, and global settings.

NOTE Never turn off the power while initializing.

30

Image 32

Korg KTV1 Preset Initialize, Backing up style and motion sequence data, Restoring style or motion sequence data

Contents

Page Precautions About the video clip collection About your dataHandling of the internal hard disk Table of Contents Main features Introduction Controls and connectors Top panel Value knob YES/WRITE key Video Input indicator Front panel Rear panel Audio Trig Input L/R jacks Connection diagram Selecting the DV connector input/output settingAbout video signal formats Basic connections Basic concepts and operation ConceptsSampling video Styles Terms Turning the power on/off PowerBasic operation Playback Monitors Selecting and playing video Playing a clipSelecting a bank Selecting a style Working with external video sources Viewing an external video sourceMixing an external video source with a clip To select an external video source Synchronizing to music Setting the BPMSynchronized playback using the BPM setting Synchronized playback using an audio trigger Adjusting the audio trigger levelUsing an external audio signal to control an effect Synchronizing the start of the clip to the audio trigger Using Motion Sequences Playing a motion sequenceLooping the playback of a motion sequence Recording a motion sequence Erasing a motion sequence Customizing a Style -Style Editing Editing a styleChoosing a style Style editing Changing the wipe type Editing examplesChanging the operation of the ribbon controller Creating a clip -Sampling and Quick Editing SamplingSampling video Sampling a video input source Resampling to a clip Capturing video and using it as an input sourceMain Out Capture Clips Copying a clipErasing a clip Editing a clip Turning Protect On or Off Banks Copying a bankAssigning a bank to a clip pad group Copying an entire bank of clips Utility mode Operations in Utility modeEntering Utility mode Navigating the Utility mode Utility menu items and procedures Midi settingSetting the control change number HDD free Backing up video data to an external device Power on setupBackup Restoring video data Restoring style or motion sequence data Preset InitializeBacking up style and motion sequence data Parameter list Style Parameter List Group B Operation settings Start Variation list Controller Assignment list Dual Routings Routing listSingle Routings Three-layer Routings Separate output Routings Main OUT Monitor OUT Transition list Parameter A2 A5 = 00 FadeParameter A2 A5 = 01 Wipe Parameter A2 A5 = 02 Wipe Enabled 1 and Enabled Effect list Clip parameter list Playback Type and Playback Pattern selectionType 1 Specified End Point Pattern 1 Normal Loop Type 2 Tempo and Beat Specified End Point Pattern 3 One-ShotPattern 4 Reverse Normal Loop Pattern 5 Reverse Alternating Loop Type 3 Specified Loop Point and End Point Pattern 1 NormalPattern 3 Reverse Normal Loop Pattern 4 Reverse Alternating Loop Type 4 Tempo and Beat Specified Loop Point and End Point Using BPM to control the video playback speed Using the kaptivator with your computerAppendix Tips for working with the kaptivator Managing data on the hard drive Sampling video from your computer into the kaptivator Using Midi to work with clips Trobleshooting Preset Style list Specifications Preset Style Cheat Video Effect settings Controller will apply a video Style User KTV1 Midi Implementation Data Processload Completed CONT# Midi Implementation Chart Important Notice to Consumers