126
Effects
Chorus, Flanger, and Phaser (Cho/Fln Phaser)
35: Ensemble

This Ensemble effect has three chorus blocks that use LFO to

create subtle shimmering, and gives three dimensional depth

and spread to the sound, because the signal is output from the

left, right, and center.

c: Shimmer

This parameter sets the amount of shimmering of the LFO wave-

form. Increasing this value adds more shimmering, making the

chorus effect more complex and richer.

36: Polysix Ensemble

This models the ensemble effect built into the classic Korg

PolySix programmable polyphonic synthesizer.

a
Speed 1...100 Sets the speed of the LFO
Src Off...Tempo Selects a modulation source for LFO
speed
Amt –100...+100 Sets the modulation amount of LFO
speed
b
Depth 0...100 Sets the depth of LFO modulation
Src Off...Tempo Selects the modulation source of
the LFO modulation depth
Amt –100...+100 Sets the modulation amount of the
LFO modulation depth
c Shimmer 0...100 Sets the amount of shimmering of
the LFO waveform
d
Wet/Dry Dry, 1:99...99:1,
Wet
Balance between the wet and dry
signal
Src Off...Tempo Table, “Dynamic Modulation
sources,” on page106
Amt –100...+100 Amount of modulation source
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
LFO
Shimmer
+
Ensemble
Time
Level
Ensemble LFO
Shimmer
a
Depth 0...100 Sets the depth of the effect
Src Off...Tempo Selects the modulation source that
will control the effect depth
Amt –100...+100 Sets the amount by which the effect
depth will be modulated
b
Wet/Dry Dry, 1:99...99:1,
Wet
Balance between the wet and dry
signal
Src Off...Tempo Table, “Dynamic Modulation
sources,” on page106
Amt –100...+100 Amount of modulation source
+
Polysix
Ensemble
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out