74
Sound operating mode
LFO: LFO2
LFO: LFO2
Here you can make settings for the LFO2, which is the second
LFO that can be applied to the selected oscillator. See “LFO:
LFO1” for more information on the parameters value.
However in “Frequency Modulation”, the LFO cannot be
selected as a modulation source in “AMS1” or “AMS2.”
Effects: “B” FX Config
This page allows you to select the effects for the Sound (B
Group). The effect types and the FX matrix are the same seen for
the Style Play mode (see “Effects: A/B FX Configuration” on
page125 of the User’s Manual).
FX Name
Use this pop-up menu to choose one of the available effects. For
a list of the available effects, see “Effects” on page235.
Insert FX - Drum Family
Use this pop-up menu to choose the Drum Family the cor-
responding Insert FX is assigned to.
FX parameters
All other parameters in this page are the same seen for the Style
Play mode (see “Effects: A/B FX Configuration” on page125 in
the User’s Manual).
Send to Master
Use these parameters to set the level of the Sound signal going
from the Insert FX to the Master FXs.
0…127 Level of the sent signal.
Dry
Use this checkbox to mix the dry, direct Sound signal to the
effects.
Effects: IFX 1
In this page you can edit the effect assigned to the Insert FX 1
effect processor. See “Effects” on page106 for more information.
Effects: Master 1 / Reverb
In this page you can edit the effect assigned to the Master FX 1
effect processor (usually Reverb). See “Effects” on page106 for
more information.
Effects: Master 2 / Chorus
In this page you can edit the effect assigned to the Master FX 2
effect processor (usually Chorus). See “Effects” on page106 for
more information.
Note: When assigning double-size effects to Master 2, either Mas-
ter 3 or the Insert FX are no longer available.
Effects: Master 3
In this page you can edit the effect assigned to the Master FX 3
effect processor. See “Effects” on page106 for more information.
Note: When turning Master 3 on, the Insert FX is no longer avail-
able.