143
Effects
Delay
Advanced
65: Stereo/CrossDelay

This is a stereo delay, and can by used as a cross-feedback delay

effect in which the delay sounds cross over between the left and

right by changing the feedback routing.

66: St. Multitap Delay(Stereo Multitap Delay)

The left and right Multitap Delays have two taps respectively.

Changing the routing of feedback and tap output allows you to

create various patterns of complex effect sounds.

a: Mode

You can change how the left and right delay signals are panned

by modifying the routing of the left and right delay as shown in

the figure above. You need to input different sounds to each

channel in order for this parameter to be effective.

d: Tap1 Level

This parameter sets the output level of Tap1. Setting a different

level from Tap2 will add a unique touch to a monotonous delay

and feedback.

a Stereo/Cross Stereo, Cross Switches between stereo delay and
cross-feedback delay
bL Delay Time
[msec] 0.0...1360.0 Sets the delay time for the left
channel
cR Delay Time
[msec] 0.0...1360.0 Sets the delay time for the right
channel
d
L Feedback –100...+100 Sets the feedback amount for the
left channel
Src Off...Tempo Selects the modulation source of
feedback amount
Amt L –100...+100 Sets the modulation amount of the
left channel feedback
e
R Feedback –100...+100 Sets the feedback amount for the
right channel
Amt R –100...+100 Sets the modulation amount of the
right channel feedback
f High Damp [%] 0...100 Sets the damping amount in the
high range
g Low Damp [%] 0...100 Sets the damping amount in the low
range
h
Input Level
Dmod [%] –100...+100 Sets the modulation amount of the
input level
Src Off...Tempo Selects the modulation source for
the input level
i Spread –50...+50
Sets the width of the stereo image
of the effect sound
j
Wet/Dry Dry, 1:99...99:1,
Wet
Balance between the wet and dry
signal
Src Off...Tempo Table, “Dynamic Modulation
sources,” on page106
Amt –100...+100 Amount of modulation source
Delay
Delay
Stereo/Cross
Left
Right
Feedback
FX Amt
FX Amt
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp Low Damp
Spread
Stereo/Cross
aMode
Normal, Cross
Feedback,
Cross Pan1,
Cross Pan2
Switches the left and right delay
routing
bTap1 Time
[msec] 0.0...1360.0 Sets the Tap1 delay time
cTap2 Time
[msec] 0.0...1360.0 Sets the Tap2 delay time
d Tap1 Level 0...100 Sets the Tap1 output level
e
Feedback
(Tap2) –100...+100 Sets the Tap2 feedback amount
Src Off...Tempo Selects the modulation source of
the Tap2 feedback amount
Amt –100...+100 Sets the modulation amount of the
Tap2 feed bac k amo unt
f High Damp [%] 0...100 Sets the damping amount in the
high range
g Low Damp [%] 0...100 Sets the damping amount in the low
range
h
Input Level
Dmod [%] –100...+100 Sets the modulation amount of the
input level
Src Off...Tempo Selects the modulation source for
the input level
i
Spread –100...+100
Sets the width of the stereo image
of the effect sound
Src Off...Tempo
Selects the modulation source of
the effect sound’s stereo image
width
Amt –100...+100 Sets the modulation amount of the
effect sound’s stereo image width
j
Wet/Dry Dry, 1:99...99:1,
Wet
Balance between the wet and dry
signal
Src Off...Tempo Table, “Dynamic Modulation
sources,” on page106
Amt –100...+100 Amount of modulation source
Left
Right
Feedback
Spread
FX Amt
FX Amt
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High DampLow Damp
High DampLow Damp
Delay
Delay
Feedback
Tap1 Level Mode
Mode
(1) (2)
(1) (2)
Tap1=(1)
Tap2=(2)
Mode: Normal Mode: Cross Feedback Mode: Cross Pan1 Mode: Cross Pan2