42
Pad Record mode
Pad Edit: Cut
Pad Edit: Cu t
This function lets you quickly delete a selected measure (or a
series of measures) from the selected Chord Variation. All fol-
lowing events are moved back, to replace the cut measure(s).
After setting the various parameters, touch Execut e.
CV (Chord Variation)
Use this parameter to select the Chord Variation for editing.
Start
First measure to be cut.
Length
Number of measures to be cut.
Execute
Touch this button to execute the operation set in this page.
Pad Edit: De lete
This page is where you can delete MIDI events out of the Pad.
This function does not remove measures from the pattern. To
remove a whole measure, use the Cut function (see “Pad Edit:
Cut” on page42)
After setting the various parameters, touch Execute.
CV (Chord Variation)
Use this parameter to select the Chord Variation for editing.
Event
Type of MIDI event to delete.
All All events. The measures are not removed from
the Chord Variation.
Note All notes in the selected range.
Dup.Note All duplicate notes. When two notes with the
same pitch are encountered on the same tick, the
one with the lowest velocity is deleted.
Aft er To uc h Aft er To uc h e ven ts .
Note: This kind of data is automatically removed
during recording.
Pitch Bend Pitch Be nd events.
Prog.Change Program Change events, excluding the bundled
Control Change #00 (Bank Select MSB) and #32
(Bank Select LSB).
Note: This kind of data is automatically removed
during recording.
Ctl.Change All Control Change events, for example Bank
Select, Modulation, Damper, Soft Pedal…
CC00/32…CC127
Single Control Change events. Double Control
Change numbers (like 00/32) are MSB/LSB bun-
dles.
Note: Some CC data are automatically removed
during recording. See the table on page5 for more
information on the allowed data.
Start / End Tick
Use these parameters to set the starting and ending points of the
range to delete.