127
Effects
Chorus, Flanger, and Phaser (Cho/Fln Phaser)
Advanced
37: Stereo Flanger

This effect gives a significant swell and movement of pitch to the

sound. It is more effective when applied to a sound with a lot of

harmonics. This is a stereo flanger. You can add spread to the

sound by offsetting the phase of the left and right LFOs from
each other.
g: Feedback

h: Wet/Dry

The peak shape of the positive and negative “Feedback” value is

different. The harmonics will be emphasized when the effect

sound is mixed with the dry sound if you set a positive value for

both “Feedback” and “Wet/Dry”, and if you set a negative value

for both “Feedback” and “Wet/Dry”.

g: High Damp [%]

This parameter sets the amount of damping of the feed back in

the high range. Increasing the value will cut high-range harmon-

ics.

38: Classic Flanger

This models a classic analog flanger. It is highly effective for

chording on clavi-type keyboards or electric piano.

aDelay Time
[msec] 0.0...50.0 Sets the delay time from the original
sound
b
LFO Waveform Triangle, Sine Selects the LFO Waveform
LFO Shape –100...+100 Changes the curvature of the LFO
Waveform
cLFO Phase
[degree] –180...+180 Sets the LFO phase difference
between the left and right
d
LFO Frequency
[Hz] 0.02...20.00 Sets the speed of the LFO
Src Off...Tempo Selects a modulation source for LFO
speed
Amt –20.00...
+20.00
Sets the modulation amount of LFO
speed
e
MIDI Sync O ff, On
When this is on, the LFO speed is set
by BPM, Base Note, and Times,
instead of Frequency
BPM
MIDI,
40.00...
300.00
MIDI syncs to the system tempo; 40–
300 sets the tempo manually for this
individual effect
Base Note r...w Selects the type of notes that
specify the LFO speed
Times x1...x32 Sets the number of notes that
specify the LFO speed
f Depth 0...100 Sets the depth of LFO
modulation
g
Feedback –100...+100 Sets the feedback amount
High Damp [%] 0...100
Sets the feedback damping amount
in the high range
h
Wet/Dry
-Wet, -
1:99...Dry...99:1
, Wet
Balance between the wet and dry
signal
Src Off...Tempo Table, “Dynamic Modulation
sources,” on page106
Amt –100...+100 Amount of modulation source
Flanger
Flanger
Left
Right
Feedback
LFO Shape
LFO Phase
LFO: Tri / Sine
FX Amt
FX Amt
High Damp
Stereo In - Stereo Out
Speed [Hz] 0.10...10.0 Sets the speed of LFO
Depth 0...100 Sets the depth of LFO
modulation
Resonance 0...100 Sets the resonance amount
Manual 1...100 Sets t he sweep frequency
LFO Reset Source Off...Tempo Selects a modulation source for LFO
reset
Reset Offset 0...100 Sets the offset
Wet/Dry
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Balance between the wet and dry
signal
Source Off...Tempo Table, “Selects a modulation source for
Wet/Dry,” on page107
Amount –100...+100 Table, “Sets the modulation amount for
Wet/Dry,” on page107
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+Flanger
LFO
Feedback
LFO Sync Reset Offset