Lantronix 900-618 manual Datagram Mode, Datagram Type, Use Broadcast, Device Address Table

4: Configuration Using Web Manager

Figure 4-8. UDP Connection Settings

Connect Protocol

Protocol

Select UDP from the drop-down menu.

Datagram Mode

Datagram Type	Configures the remote IP or network broadcast address and
	the remote port. Enter 01 for directed or broadcast UDP. The
	default setting is 00.
Accept Incoming	Select Yes to accept incoming UDP datagrams.

Endpoint Configuration

Local Port	Enter the local port number.
Remote Port	Enter the port number of the remote device.
Remote Host	Enter the IP address of the remote device.
Use Broadcast	Select to broadcast the UDP datagram. The default is not to
	broadcast.
	Note: Datagrams are sent as subnet-directed broadcasts.
Device Address Table	The table is enabled when Datagram Type is set to FD. Enter
	values between 1 and 255 to identify units on the local
	network of device servers.
	Note: Lantronix Tech Support supports Datagram type 01.
	Datagram Type FD is for OEM use.

xPico User Guide 31