Lantronix 900-618 manual Channel 1 and 2 Configuration, Retry Settings, Host Information

4: Configuration Using Web Manager

The host list supports a minimum of 1 and a maximum of 12 entries. Each entry contains an IP address and a port number.

Note: The host list is disabled for Manual and Modem Mode. The unit does not accept a data connection from a remote device when the hostlist option is enabled.

To configure the xPico’s host list:

1. On the main menu, click Hostlist.

Figure 4-5. Hostlist Settings

2. Enter or modify the following fields:

Retry Settings

Retry Counter	Enter the value for the number of times the xPico should
	attempt to retry connecting to the host list.
Retry Timeout	Enter the duration (in milliseconds) the xPico should abandon
	attempting a connection to the host list.

Host Information

Host Address	Enter or modify the host’s IP address.
Port	Enter the target port number.

3.When you are finished, click the OK button.

4.On the main menu, click Apply Settings.

Channel 1 and 2 Configuration

The Channel 1 and Channel 2 configuration define how the serial ports respond to network and serial communication.

xPico User Guide 24