Lantronix 900-618 manual Using Tftp Command Line Interface, Tftp Window

10: Firmware Upgrades

Figure 10-1. TFTP Window

6.Click the Put button to transfer the file to the unit. The unit performs a power reset after the firmware has been loaded and stored.

After the firmware has been loaded and stored, which takes approximately 8 seconds to complete, the unit performs a power reset.

Using TFTP: Command Line Interface

To download new firmware from a computer:

1.Enter the following from a TFTP command line interface:

tftp –i <ip address> put <local filename> <destination file name>

The following examples demonstrate the TFTP command sequence to download the

.rom file and the .cob file:

tftp –i 192.168.1.111 put xpico_6800 X6

tftp –i 192.168.1.111 put xpico_webm_1900.cob WEB1

xPico User Guide 68