Lantronix 900-618 manual Using This Guide, Purpose and Audience, Chapter Summary

1. Using This Guide

Purpose and Audience

This guide covers xPico Device Server Module. It provides the information needed to configure, use, and update the xPico firmware and is intended for OEMs and system integrators who are embedding the xPico in their end product designs.

Chapter Summary

The remaining chapters in this guide include:

Document	Description
2: Introduction	Describes the main features of the xPico and the protocols
	it supports.
3: Using DeviceInstaller	Provides information for getting your unit up and running,
	using DeviceInstaller to assign an IP address.
4: Configuration Using Web	Details using the Web-Manager to set parameters such as
Manager	port and server properties.
5: Configuration via Telnet or	Provides instructions for accessing Setup Mode (command
Serial Port (Setup Mode)	line interface) using a Telnet connection through the
	network or a terminal or terminal emulation program
	through the serial port.
6: Setup Mode: Server	Details the network (server) settings
Configuration
7: Setup Mode: Channel	Details the serial port settings.
Configuration
8: Setup Mode: Advanced	Details expert and security settings and explains how to
Settings	reset the unit to factory default values.
9: GPIO Interface	Provides instructions for configuring the eight General
	Purpose I/O pins (CP1-8).
10: Firmware Upgrades	Provides instructions for obtaining the latest firmware and
	updating the xPico.
11: Monitor Mode	Provides instructions for accessing and using the
	command line interface for monitoring the network and
	diagnosing problems.
12: Troubleshooting	Describes common problems and error messages and how
	to contact Lantronix Technical Support.
A: Binary to Hexadecimal	Provides instructions for converting binary numbers to
Conversions	hexadecimals.
B: Compliance	Provides compliance information.

xPico User Guide 9