8. Setup Mode: Advanced Settings
Expert Settings (Option 5)
Note: You can change the Enable alternate MAC setting using telnet or serial connections only. It is not available through the
CAUTION: Only an expert should change these parameters. You must definitely know the consequences the changes might have.
Figure 8-1. Expert Settings
TCP Keepalive time in s (1s - 65s; 0s=disable): (45) ?
ARP Cache timeout in s (1s - 600s) : (600) ?
CPU performance (0=Regular, 1=Low, 2=High): (0) ?
Disable Monitor Mode @ bootup (N) ?
HTTP Port Number : (80) ?
MTU Size (512 - 1400): (1400) ?
TCP
Enable alternate MAC (N) ?
Ethernet connection type: (0) ?
The default settings are listed below:
TCP Keepalive time in s | 45 | |
(1s – 65s; 0s=disable) |
|
|
ARP Cache timeout in s | 600 | |
(1s – 600s) |
|
|
CPU Performance | Regular | |
Disable Monitor Mode @ bootup | No | |
HTTP Port Number | 80 | |
|
| |
|
|
|
MTU Size (512 – 1400) | 0 | (resulting in an operational value of 1400) |
TCP | 0 | (resulting in an operational value of 500) |
Enable alternate MAC | No (OEM use only) | |
Ethernet connection type | 0 | (resulting in |
TCP Keepalive time in seconds
This option allows you to change how many seconds the unit waits during a silent connection before attempting to see if the currently connected network device is still on the network. If the unit gets no response, it drops that connection.
TCP Keepalive time in s (1s – 65s; 0s=disable): (45)? _
xPico User Guide | 54 |
