Lantronix 900-618 manual Response, Active Startup

7: Setup Mode: Channel Configuration

b) Response

Character Response

A single character is transmitted to the serial port when there is a change in connection state:

C = connected, D = disconnected, N = host unreachable.

The IP address of the host connecting to the CoBos device will be provided when you use verbose mode.

This option is overridden when the Active Start Modem Mode or Active Start Host List is in effect. Default setting is Nothing (quiet).

c) Active Startup

No Active Startup	Does not attempt to initiate a connection under any
	circumstance. Default setting.
With Any Character	Attempts to connect when any character is received from the
	serial port.
With active Modem	Attempts to connect when the Modem Control In input changes
Control In	from not asserted to asserted.
With a Specific Start	Attempts to connect when it receives a specific start character
Character	from the serial port. The default start character is carriage return.

xPico User Guide 44