3: Using DeviceInstaller DHCP Device Name
Non-configurable field. Displays the name associated with
xPico’s current IP address, if the IP address was obtained
dynamically.
To change the DHCP device name, see Configuration Using
Web Manager
or Configuration via Telnet or Serial Port (Setup Mode).
Group
Configurable field. A group name to categorize the xPico.
Double-click the field, type in the value, and press Enter to
complete. This group name is not visible on other PCs or
laptops using DeviceInstaller.
Comments
Configurable field. Information about the xPico.
Double-click the field, type in the value, and press Enter to
complete. This description or comment is not visible on other
PCs or laptops using DeviceInstaller.
Device Family
Non-configurable field. Displays the xPico’s device family as
xPico.
Type
Non-configurable field. Displays the device type as xPico.
ID
Non-configurable field. Displays the xPico’s ID embedded
within the unit.
Hardware Address
Non-configurable field. Displays the xPico’s hardware (or MAC)
address.
Firmware Version
Non-configurable field. Displays the firmware currently installed
on the xPico.
Extended Firmware
Version
Non-configurable field. Displays the full version nomenclature of
the firmware.
Online Status
Non-configurable field. Displays the xPico’s status as online,
offline, unreachable (the xPico is on a different subnet), or busy
(the xPico is currently performing a task).
IP Address
Non-configurable field. Displays the xPico’s current IP address.
To change the IP address, see Assigning an IP Address on
page 14.
IP Address was Obtained
Displays “Dynamically” if the xPico automatically received an
IP address (e.g., from DHCP). Displays “Statically” if the IP
address was configured manually. If the IP address was
assigned dynamically, the following fields appear:
Obtain via DHCP with value of True or False.
Obtain via BOOTP with value of True or False.
Obtain via RARP with value of True or False
Obtain via Auto IP with value of True or False
Subnet Mask
Non-configurable field. Displays the xPico’s current subnet
mask. To change the subnet mask, see Assigning an IP
Address on page 14.
Gateway
Non-configurable field. Displays the xPico’s current gateway.
To change the gateway, see Assigning an IP Address on page
14.
Number of COB partitions
supported
Non-configurable field. Displays the number of COB partitions
supported.
Number of Ports
Non-configurable field. Displays the number of ports on the
xPico.
TCP Keepalive
Non-configurable field. Displays 1-65s, the xPico’s TCP
keepalive value. The default setting is 45.