Lantronix Hub manual Outbound Connections, Logout

MSS User Guide 3: Getting Started

Outbound Connections

When logged into the MSS, users can make basic outgoing connections using the methods described in this section. See the MSS Reference Manual on the CD-ROM for more information about incoming and outgoing connections.

Note: Outgoing connections cannot be made via the same method as the incoming connection was made. Thus, if Telnet was used to enter the MSS, it cannot be used to back out.

To start an outgoing Telnet session, type Telnet at the Local> prompt, followed by either the host’s name or its numeric IP address.

Figure 3-19: Telnet Connection

Local> TELNET 192.0.1.66

Logout

To manually log out of the MSS, type Logout at the Local> prompt or press Ctrl-D.

Figure 3-20: Logging out of the MSS

Local> LOGOUT

3-22