Lantronix UDS1100 manual Technical Specifications, Category Description

13: Technical Specifications

	Table 13-1. UDS1100 Technical Specifications
Category	Description
CPU	Lantronix DSTNI-EX 48 MHz clock
Internal CPU Memory	256 KB zero wait state SRAM
Flash	2 MB Flash
EEPROM	2 KB EEPROM
Serial Interface	1 DB25F DCE serial port
	Software-selectable baud rate from 300 to 230 KBaud
	Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)
Serial Line Formats	Characters: 7 or 8 data bits
	Stop bits: 1 or 2
	Parity: odd, even, none
Modem Control	DTR, DSR
Flow Control	Hardware: CTS/RTS
	Software: XON/XOFF
Power Input	9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum consumption)
	9-30 VDC on DB25F serial interface
Network Interface	1 RJ45 10Base-T/100Base-TX Ethernet port
	Software selectable Ethernet speed 10/100/Auto
	Software selectable Half/Full/Auto duplex
Dimensions	Height: 2.3 cm (0.9 in)
	Width: 6.4 cm (2.5 in)
	Depth: 9.0 cm (3.5 in)
Weight	0.20 kg (0.45 lb)
Temperature	Operating range: 5° to +50° C (41° to 122° F)
	Storage -40° to 66° C (-40 to 151° F)
Relative Humidity	Operating 10% to 90% non-condensing, 40% to 60% recommended
	Storage 10% to 90% non-condensing
Case	Metal enclosure with integrated wall mounts
	Optional 35 mm Din Rail mount available
Protocols Supported	ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, and HTTP
Installable Industrial	ModBus TCP, ModBus ASCII/RTU, DF1 Multi-Master (IAP version only)
Protocols
Management	Internal web server
	SNMP (read only)
	Serial login
	Telnet login
UDS1100 User Guide	73