Lantronix UDS1100 manual Connect Mode Active Connection, Endpoint Configuration, Common Options

		4: Configuration Using Web-Manager
Connect Mode: Active Connection
	Active Connect	Select None (default) to disable Active Connect. Otherwise,
		indicate the connection type from the drop-down list:
		‹ With Any Character: Attempts to connect when any
		character is received from the serial port.
		‹ With Active Mdm Ctrl In: Accepts external
		connection requests only when the
		modem_control_in input is asserted.
		‹ With Start Character: Attempts to connect when it
		receives a specific start character from the serial
		port. The default start character is carriage return.
		‹ Manual Connection: Attempts to connect when
		directed by a command string received from the
		serial port.
		‹ Auto Start: Automatically connects to the remote IP
		address and port after booting up.
	Start Character	If Active Connect is set to With Start Character, enter the
		start character in this field. The default setting is 0D.
	Modem Mode	Indicates the on-screen response type when in Modem Mode
		(if Modem Mode is enabled). The default setting is None.
Endpoint Configuration
	Local Port	Enter the local port number.
	Auto increment for active	Select to auto-increment the local port number for new
	connect	outgoing connections. The range of auto-incremented port
		numbers is 50,000 to 59,999 and loops back to the beginning
		when the maximum range is reached. Disabled by default.
	Remote Port	Enter the remote port number.
	Remote Host	Enter the IP address of the remote device.
Common Options
	Telnet Mode	This field is available for configuration only when Active
		Connect is set to None. Select Enable to permit Telnet
		communication to the UDS1100 unit.
	Terminal Name	This field is available for configuration only when Telnet Mode
		is set to Enable.
		Use the terminal name for the Telnet terminal type. Enter only
		one name. When this option is enabled, the unit also reacts to
		the end of record (EOR) and binary options, which can be
		used for applications such as terminal emulation to IBM hosts.
	Connect Response	A single character is transmitted to the serial port when there
		is a change in connection state. The default setting is None.

UDS1100 User Guide 31