Additional Documentation, Using This Guide | Lantronix UDS1100

1: Using This Guide

B:Binary to Hexadecimal Conversions

Provides instructions for converting binary values to hexadecimals.

Additional Documentation

The following information is available on the product CD or the Lantronix Web site: www.lantronix.com

	UDS1100 Quick Start	Provides the steps for getting the UDS1100 up and
		running.

	DeviceInstaller Online Help	Provides instructions for using the Windows-based utility
		to configure the UDS1100 and other Lantronix device
		servers.

	“Live” Tutorials on the	Explain and demonstrate assigning an IP address to the
	Lantronix Web Site (English)	UDS and setting up the UDS and Com Port Redirector.
		See http://ts.lantronix.com/tutorials.html.

	Com Port Redirector User	Provides information on using the Windows-based utility
	Guide	Provides information on using the Windows-based utility
	Guide	to create a virtual com port.
		to create a virtual com port.

UDS1100 User Guide

8

Image 8

Lantronix UDS1100 manual Additional Documentation, Using This Guide

Contents

UDS1100 User Guide Copyright & Trademark ContactsRevisions Date Rev Comments 900-417 Contents Setup Mode Server Configuration Troubleshooting and Contact Information Contents Tables Chapter Summary Using This GuidePurpose and Audience Using This Guide Additional Documentation Application Examples IntroductionApplications Introduction Protocol Support Additional FeaturesConfiguration Methods Product Information Label Sample Hardware Address Package Contents Getting Started Installing the UDS To install the unit Required Information Hardware AddressIP Address IP Address Subnet Mask Gateway Assigning the IP Address DeviceInstaller Installing DeviceInstallerAssigning an IP Address Select Assign a specific IP address and click Next Accessing the UDS1100 Using DeviceInstaller Viewing the Current ConfigurationTo view the units current settings Adding the Unit to the Manage List IP Address on Assigning the IP Address Serial Port Login Next Step Getting Started Configuration Using Web-Manager Accessing UDS1100 Using DeviceInstaller Network Configuration Lantronix Web-Manager Automatic IP Address Configuration Static IP Address Configuration To specify how data will be transmitted Server ConfigurationEthernet Configuration Advanced To configure the UDS1100’s device server settingsServer Configuration Retry Settings Host List ConfigurationTo configure the host list Channel 1 Configuration Serial SettingsTo configure the channel’s serial settings Host Information Pack Control Port SettingsChannel Connection Settings TCP To configure a channel’s TCP settingsFlush Input Buffer Serial to Network Flush Output Buffer Network to Serial Connect Mode Passive Connection Connect Protocol Common Options Connect Mode Active ConnectionEndpoint Configuration To configure a channel’s UDP settings Connection Settings UDPDisconnect Mode Datagram Mode UDP Connection Settings Apply Settings Apply Factory Defaults Configuration via Telnet or Serial Port Setup Mode Accessing Setup ModeTelnet Connection To establish a Telnet connection Serial Port Connection Exiting Setup ModeTo exit setup mode Setup Mode Server Configuration Server Configuration OptionIP Address Set Gateway IP Address Change Telnet Configuration Password Netmask Number of Bits for Host PartDhcp Name Network Class Host Bits Netmask Setup Mode Server Configuration Baudrate Setup Mode Channel ConfigurationChannel 1 Option Interface Mode Mode OptionCommon I/F Mode Setting Binary Flow Connect Mode Port NumberFlow Control Option Hex Port Numbers Reserved for Connect Mode Option Incoming Connection Response Active Startup Manual Connection Address Example Datagram Type Modem ModeTo enable the hostlist MessageMeaning No Carrier Modem Mode Function Command ATD Send the Escape Sequence +++ in Modem Mode Auto Increment Source PortRemote IP Address Remote Port Flush Mode Buffer Flushing Disconnect Mode Option Pack Control Option DisConnTime Inactivity Timeout Send CharactersPacking Interval Trailing Characters Channel Port Password Telnet Terminal Type TCP Keepalive time in seconds Setup Mode Advanced SettingsExpert Settings Option ARP Cache timeout in seconds Disable Monitor Mode at bootupEnable alternate MAC Http Port Number Security Settings Option Disable SnmpDisable Telnet Setup Snmp Community Name Disable Tftp Firmware Update Disable Port 77FE HexDisable Web Server Disable Web Setup Default Settings Option Channel 1 Configuration DefaultsExpert Settings Defaults Security Settings Defaults Setup Mode Advanced Settings Firmware Upgrades Using Tftp Graphical User InterfaceObtaining Firmware Reloading Firmware ROM File Using Tftp Command Line Interface To recover firmware Firmware Upgrades Monitor Mode Entering Monitor Mode Using the Serial PortEntering Monitor Mode Using the Network Port Monitor Mode Commands Command Command Name Function Response Meaning Troubleshooting and Contact Information LEDs Problems and Error Messages Problem/Message Reason Solution Lock on Technical Support Technical Support Europe, Middle East, and Africa Serial Port Serial Connector PinoutsConnections and Pinouts DB25 Female Interface RS422 4 wire mode Modem Cable Network Port Null Modem Cable Lantronix Part No Ethernet Connector Pinouts Power Plug Technical Specifications Category Description Technical Specifications Alternative Ways to Assign an IP Address AutoIP ARP and Telnet To assign a temporary IP address Decimal Binary Hex Converting Binary to HexadecimalConversion Table Scientific Calculator Warranty Compliance and Disclaimer Disclaimer and Supplementary Information Index UDS1100 User Guide