Lantronix To configure the UDS1100’s device server settings, Server Configuration, Advanced

4: Configuration Using Web-Manager

Figure 4-3. Server Settings

To configure the UDS1100’s device server settings:

1.On the main menu, click Server.

2.Configure or modify the following fields:

Server Configuration

Telnet Password	Enter the password required for Telnet access.
Retype Password	Re-enter the password required for Telnet access.

Advanced

ARP Cache Timeout	When the unit communicates with another device on the
(secs)	network, it adds an entry into its ARP table. ARP Cache
	timeout defines the number of seconds (1-600) before it
	refreshes this table.
TCP Keepalive (secs)	TCP Keepalive time defines how many seconds the unit waits
	during an inactive connection before checking its status. If the
	unit does not receive a response, it drops that connection.
	Enter a value between 0 and 60 seconds. 0 disables
	keepalive. The default setting is 45.
Monitor Mode @ Bootup	Select Disable to disable entry into the monitor mode using
	the yyy or xx1 key sequence at startup. This field prevents
	the unit from entering monitor mode by interpreting the stream
	of characters that are received during the device server's
	initialization at startup. The default setting is Enable.
HTTP Server Port	This option allows the configuration of the web server port
	number. The valid range is 1-65535. The default setting is 80.

UDS1100 User Guide 25