6. Remove the old battery.
Figure 16. Removing the old battery
7. Install the new battery.
Figure 17. Installing the new battery
8.Reinstall any parts and reconnect any cables that have been removed or disconnected.
9.Lower the drive bay assembly. See “Accessing the system board components and drives” on page 14.
10.Reinstall the computer cover and reconnect all external cables. See “Completing the parts replacement” on page 40.
11.Turn on the computer and all attached devices.
Note: When the computer is turned on for the first time after replacing the battery, an error message might be displayed. This is normal after replacing the battery.
12.Use the Setup Utility program to set the date, time, passwords, and any other configuration information. See Chapter 4 “Using the Setup Utility program” on page 51.
What to do next:
•To work with another piece of hardware, go to the appropriate section.
•To complete the replacement, go to “Completing the parts replacement” on page 40.
Replacing the heat sink and fan assembly
Attention: Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://support.lenovo.com
This section provides instructions on how to replace the heat sink and fan assembly.
CAUTION:
The heat sink and fan assembly might be very hot. Turn off the computer and wait three to five minutes to let the computer cool before removing the computer cover.
Chapter 2. Installing or replacing hardware 21
