Setup troubleshooting
74
Removing and reinstalling the drivers software
If the software is not functioning properly or a communications error message appears, you may
need to remove and then reinstall the drivers software. If the problems persist, follow these steps:
Note: Before reinstalling, shut down and restart the computer.
1Disconnect the USB cable from the computer.
2From the desktop, click StartÆ Programs Æ Lexmark Æ Lexmark Software Uninstall.
3Follow the instructions on the computer screen to remove the software.
4Restart the computer.
5If any Add New Hardware screens appear, click Cancel.
6Eject and reinsert the software C D.
7Reconnect the USB cable to the computer.
If the software installation screen does not appear:
1From the desktop, double-click My Computer.
For Windows XP, click Start to access the My Computer icon.
2Double-click the CDROM drive icon. If necessary, double-click setup.exe.
3When the MFP software installation screen appears, click Install or Install Now.
4Follow the instructions on the computer screen to complete the installation.