Lexmark 342n, 340 Understanding the operator panel, Pitch, Point Size, Symbol Set, Tray Renumber

Understanding the operator panel

Menu item	Purpose		Values
Pitch	To specify the font pitch for scalable		0.08...100	Pitch refers to the number of fixed-
	monospaced fonts.		(in increments of	space characters in a horizontal inch
			0.01 cpi)	of type. You can select a pitch from
				0.08 to 100 characters per inch (cpi) in
			10*
				increments of 0.01 cpi. For
				nonscalable monospaced fonts, the
				pitch is displayed, but cannot be
				changed.
				Note: Pitch is only displayed for fixed,
				or monospaced, fonts.
Point Size	To change the point size for scalable		1...1008	Point size refers to the height of the
	typographic fonts.		in increments of	characters in the font. One point
			0.25 points)	equals approximately 1/72 of an inch.
				You can select point sizes from 1 to
			12*
				1008 in increments of 0.25 points.
				Note: Point Size is only displayed for
				typographic fonts.
Symbol Set	To choose a symbol set for a specified		10U PC-8*	A symbol set is a set of alphabetic and
	font name.		(country/region-	numeric characters, punctuation, and
			specific factory	special symbols used when printing
			default values)	with a selected font. Symbol sets
				support the different requirements for
			12U PC-850*
				languages or specific applications,
			(country/region-	such as math symbols for scientific
			specific factory	text. Only the symbol sets supported
			default values)	for the selected font name are
				displayed.
Tray Renumber	To configure your printer to work with printer drivers or applications that use different source
	assignments for the paper trays.
	Note: See the Technical Reference for more information about assigning source numbers.
	1	Select a paper source.	Assign Tray <x>
			Assign Man Env
			Assign Man Paper
	2	Select a value.	Off*	Printer uses factory default paper
				source assignments.
			0...199	Select a numeric value to assign a
				custom value to a paper source.
			None	Paper source ignores the Select Paper
				Feed command.
	Other Tray Renumber selections		View Factory Def	Press Menu to display the factory
				default value assigned to each paper
				source.
			Restore Defaults	Select Yes to return all tray
				assignments to factory default values.

Using the printer menus

72