1Flex and fan the pages.
2Place the pages in the ADF.
3Adjust the ADF guides.
4From the printer control panel, press .
293.02 Flatbed Cover Open
Close the scanner cover.
294 ADF Jam
This jam location may also be identified as 294.04 Duplex Sensor Off Jam, 294.05 Scan Sensor Off
Jam, or 294.06 ADF Backfeed Jam. To clear this jam:
1Remove all pages from the ADF.
Note: The message clears when the pages are removed from the ADF.
2Flex and fan the pages.
3Place the pages in the ADF.
4Adjust the ADF guides.
5From the printer control panel, press .
840.01 Scanner Disabled
This message indicates that the scanner has been disabl ed by the system support person.
840.02 Scanner Auto Disabled
This message indicates the printer identified a problem with the scanner and automatically disabled it.
1Remove all pages from the ADF.
2Turn the printer off.
3Wait 15 seconds, and then turn the printer on.
4Place the document in the ADF.
5Press .
Note: If turning the printer off and then on again does not clear t he message, then contact your system s upport
person.
Troubleshooting
184