Loading paper and specialty media
This section explains how to load the trays an d feeders. It also includes info rmation about paper orientation, setting
the Paper Size and Paper Type, and linking and unlinking trays.

Setting the Paper Size and Paper Type

After you set the Paper Size and Paper Type to the correct settings for the size and type used in the trays, then any
trays containing the same size and type are automatically linked by the printer.
Note: If the size of the paper being loaded now is the same size as the previously loaded paper, do not change the
Paper Size setting.
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
Paper Menu appears.
3Press .
4Press the arrow button s until Size/Type appears, and then press .
Select Source appears.
5Press the arrow buttons until the correct source a ppears, and then press .
Size appears under the source name.
6Press .
7Press the arrow buttons until the correct size appears, and then press .
Submitting Changes appears, followed by Size.
8Press the arrow button s until Type appears, and then pres s .
9Press the arrow buttons until the correct type appea rs, and then press .
Submitting Changes appears, followed by Type.

Configuring Universal paper settings

The Universal Paper Size is a user-defined setting tha t lets you print on paper sizes that are not preset in the printer
menus. Set the Paper Size for the Manual Feeder to Universal when the size you want is not available f rom the Paper
Size menu. Then, specify all of the following Unive rsal size settings for your paper:
Units of measure (inches or millimeters)
Portrait Height and Portrait Width
Feed Direction
Note: The smallest supported Universal size is 76 x 127 mm (3 x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.). Paper
that weighs at least 75 g/m2 (20 lb) is recommended for sizes less than or equal to 182 mm (7.17 in.) wide.
Loading paper and specialty media
41