4Press the arrow button s until Eco-Mode appears, and then press .
5Select the setting you want, and then press .
Submitting changes appears.

Adjusting Power Saver using the printer c ontrol panel

1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press the arrow button s until Settings appears, and then press .
4Press the arrow button s until General Settings appears, and then press .
5Press the arrow button s until Timeout appears, and then press .
6Press the arrow button s until Power Saver appears, and then press .
7Press the arrow buttons to en ter the number of minutes fo r the printer to wait before entering the Power Saver
mode. Available settings range from 1–240 minutes.
8Press .
Submitting changes appears.
9Press , and then press until Ready appears.

Adjusting Power Saver using the Embedded Web Server

Available settings range from 1-240 minutes. The factory default setting is 30 minutes.
To increase or decrease the number of minutes before the printer enters Power Saver mode:
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2Click Settings, and then click General Settings.
3Click Timeouts.
4In the Power Saver box, increase or decrease the number of minutes you want the printer to wait bef ore it enters
Power Saver mode.
5Click Submit.
Recycling
Lexmark provides collection programs and environmentally progressive approa ches to recycling. For more
information, see:
The Notices chapter
The Environmental Sustainability section of the Lexmark Web site at www.lexmark.com/ environment
The Lexmark recycling program at www.lexmark.com/recycling
Minimizing your printer's environmental impact
38