Choose scanning

You can avoid making a paper output of a doc ument or photograph by scanning it to save to a computer program,
application, or flash drive. For more information, see:
“Scanning to a computer” on pa ge 102
“Scanning to a flash drive” on page 103

Check your first draft for accuracy

Before printing or making multiple copies of a document:
Use the Lexmark preview feature, which you can select from the Print dialog, the Lexmark Toolbar, or the printer
display, to see what the docu ment will look like befor e you print it.
Print one copy of the document to check its content and format for accuracy.

Avoid paper jams

Carefully select and load pap er to avoid paper jams. For more information, see “Avoiding jams” on p age 42.
Saving energy
You may be able to further reduce energy by adjusting Power Saver.

Using Eco-Mode

Use Eco-Mode to quickly select one or more ways to reduce your printer's environmental impact.
Note: See the table for the multiple settings that change when you select an Eco-Mode setting.
Choose To
Energy Reduce energy use, especially when the printer is idle.
Printer engine motors do not start until a job is ready to print. You may notice a short delay before the
first page is printed.
The printer enters Power Saver mode after one minute of inactivity.
When the printer enters Power Saver mode, the printer control panel display and option lights are
turned off.
The scanner lamps are activated only when a scan job is started.
Paper Print appears on both sides of a print, copy, or received fax.
Fax transmission log features are turned off.
Energy/Paper Use all the settings associated with Energy mode and Paper mode.
Off Use factory default settings. This setting supports the performance specifications for your printer.
To select an Eco-Mode setting:
1From the printer control panel, press .
2Press the arrow button s until Settings appears, and then press .
3Press the arrow button s until General Settings appears, and then press .
Minimizing your printer's environmental impact
37