Printing information pages
See “Printing a menu settings page” on page 25 and “Printing a network setup page” on page 25 for more information
on printing these pages.

Printing a font sample list

To print samples of the fonts currently avail able for your printer:
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press the arrow button s until Reports appears, and then press .
4Press the arrow button s until Print Fonts appears, and then press .
5Press the arrow button s until PCL Fonts or PostScript Fonts appears, and then press .
After the font sample list prints, Re ady appears.

Printing a directory list

A directory list shows the resources stored in flash memory.
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press the arrow button s until Reports appears, and then press .
4Press the arrow button s until Print Dire ctory appears, and then press .
After the directory lis t prints, Ready appears.

Printing the print quality test pages

Print the print qu ality test page s to isolate pr int quality pro blems.
1Turn the printer off.
2Hold down and while turning the printer on.
3Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4Press the arrow button s until Prt Quality Pgs appears, and then press .
The print quality test pages print.
5Press the arrow button s until Exit Config Menu appears, and then press .
Resetting the Printer appears briefly, followed by a clock, and then Re ady appears.
Printing
67