Installing the printer on a wired network
Use the following instructions to install the printer on a w ired network. These instructions apply to Ethernet and fiber
optic network connections.
Before you install the printer on a wired network, make sure that:
You have completed the initial setup of the printer.
The printer is connected to your network with the approp riate type of cable.

For Windows users

1Insert the Software and Documentation CD.
Wait for the Welcome screen to appear.
If the CD does not launch after a minute, then launch the CD manually:
aClick , or click Start and then click Run.
bIn the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
2Click Install Printer and Software.
3Click Agree to agree to the License Agreement.
4Select Suggested, and then click Next.
Note: To configure the printer us ing a static IP address, IPv6, or sc ripts, select Custom and fol low the on-screen
instructions.
5Select Wired Network Attach, and then click Next.
6Select the printer manufacturer from the list.
7Select the printer model from the list, and then click Next.
8Select the printer from the list of printers discover ed on the network, and then click Finish.
Notes:
If your configured printer does not appear in the list of discovered printers, then click Add Port and follow
the on-screen instructions.
If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
9Follow the on-screen inst ructions to complete the installation.

For Macintosh users

1Allow the network DHCP server to assign an IP address to the printer.
2Print the network setup page from the printer. For information on printing a network setup page, see “Printing
a network setup page” on page 25.
3Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you
are configuring access for computers on a different subnet than the printer.
Additional printer setup
33