3Connect the DSL filter cable to an active telephone wall jack.
2
3
1
Connecting to a PBX or ISDN system
If you use a PBX or ISDN converter or terminal adapter, then follow these steps to co nnect the equipment:
1Connect one end of the telephone cable that came wit h the printer to the printer LINE port .
2Connect the other end of the telephone cable to the port designated for fax and telephone use.
Notes:
•Make sure the terminal adapter is set to the correct switch type for your region.
•Depending on the ISDN port assignment, you may have to connect to a specific port.
•When using a PBX system, make sure the call waiting tone is off.
•When using a PBX system, dial the outside line prefix before dialing the fax number.
•For more information on using the fax with a PBX system, see the documentation that came with your PBX
system.
Connecting to a distinctive ring service
A distinctive ring service may be available from your telephone service provider. This servi ce allows you to have
multiple telephone numbers on one telephone line with each t elephone number having a different ring patt ern.
This may be useful for distinguishing between fax and voic e calls. If you subscribe to a distinctive ri ng service, follow
these steps to connect the equipment:
1Connect one end of the telephone cable that came wit h the printer to the printer LINE port .
2Connect the other end of the telephone cable to an active analog telephone wall jack.
3Change the Distinctive Rings setting to match the setting you want the printer to answer:
aFrom the printer control pan el, press .
bPress the arrow buttons until Settings appears, and then press .
cPress the arrow buttons until Fax Settings appears, and then press .
Faxing
86